logo
خانه اخبار

اخبار شرکت LED Application Scenarios: 2835 Green SMD LED 515-525nm for Exit Signs, Escape Routes & Safety Signage

گواهی
چین Dongguan Lanjin Optoelectronics Co., Ltd. گواهینامه ها
چین Dongguan Lanjin Optoelectronics Co., Ltd. گواهینامه ها
نظرات مشتریان
قطعات قابل اعتمادی LED با قیمت رقابتی تیم فنی آنها حمایت قوی از پروژه های روشنایی ما را ارائه می دهد بسیار توصیه می شود

—— "نیک"

ما چندین سال است که با هم همکاری می کنیم. عملکرد پایدار محصول و ارتباط حرفه ای به رشد پایدار کسب و کار ما کمک می کند.

—— دایود

تامین کننده قابل اعتماد، کیفیت پایدار و همکاری روان در تمام اوقات.

—— ارالدو

قطعات LED با کیفیت خوب، قیمت مناسب و تحویل به موقع. از خرید راضی هستم، توصیه می شود.

—— تجس کی

شكراً لثقتكم ودعمكم المستمر. أتمنى لعملكم الازدهار وكل التوفيق!

—— توماسو

مایه افتخار ماست که با شما همکاری می‌کنیم. از حمایت مداوم شما سپاسگزاریم. باشد که شراکت ما همچنان رو به رشد باشد و دستاوردهای بیشتری را با هم به ارمغان بیاورد.

—— رامش

ما از محصولات و خدمات قابل اعتماد شما قدردانی می کنیم. امیدواریم کسب و کار ما همچنان شکوفا شود.

—— پدرو

از اعتماد شما سپاسگزارم. بیایید برای روشن کردن آینده‌ای درخشان‌تر به همکاری ادامه دهیم.

—— دینش

سفر فوق‌العاده‌ای بود که با شما همکاری کردیم. ما عمیقاً از اعتماد بلندمدت شما قدردانی می‌کنیم. ما به بهینه‌سازی محصولات و خدمات LED خود ادامه خواهیم داد و آینده‌ای روشن‌تر را در کنار هم خلق خواهیم کرد.

—— گرگ چو

از حمایت شما سپاسگزارم و منتظر همکاری بلند مدت هستیم

—— میران

از اعتماد و همکاری طولانی مدت شما سپاسگزاریم. ما به ارائه قطعات LED قابل اعتماد با کیفیت پایدار و پشتیبانی رقابتی ادامه خواهیم داد. برای شما در کسب و کارتان آرزوی رونق همیشگی داریم.

—— توشی رید

چت IM آنلاین در حال حاضر
شرکت اخبار
LED Application Scenarios: 2835 Green SMD LED 515-525nm for Exit Signs, Escape Routes & Safety Signage
آخرین اخبار شرکت LED Application Scenarios: 2835 Green SMD LED 515-525nm for Exit Signs, Escape Routes & Safety Signage

The one light source that must work when everything else fails is the green exit sign. Because the human eye peaks around 555 nm, a 515–525 nm green LED delivers more perceived brightness per watt than red or blue at the same drive current — exactly the margin battery-backed emergency luminaires need. The 2835 Green SMD LED from Dongguan Lanjin Optoelectronics Co., Ltd. is built around that physics: a 2.8 × 3.5 × 0.8 mm top-view package that pushes 10–30 lm at only 0.2 W.

Why Green Is the Default Colour for Safety Signage

International wayfinding conventions reserve green for safe conditions, exits and escape routes, while red marks prohibition and fire equipment. That convention is also practical: at equal electrical input the 2835 green chip reads brighter to the human eye than a red emitter, so a sign can hit the required luminance with fewer chips, a smaller heat sink and a smaller battery pack. In smoke-filled corridors a narrow 515–525 nm band stays clearly recognisable instead of washing out into a pale glow.

Design takeaway: same sign luminance, roughly one third less current than a typical red solution — that difference goes straight into backup runtime.

Technical Snapshot

Parameter Specification
Model2835 Green SMD LED (top view)
Package size2.8 × 3.5 × 0.8 mm
Wavelength515–525 nm green
Power / current0.2 W / 60 mA
Forward voltage2.8–3.4 V
Luminous flux10–30 lm
Viewing angle120°
Lifetime / warranty50,000 hours / 2 years
Operating temperature−40 °C to +85 °C
Reel / MOQ4,000 pcs per reel / MOQ 4,000 pcs
Chip / complianceSan'an chip, RoHS & Reach, 500 KK/month

Five Applications That Fit This Chip

1. Self-contained emergency exit signs

Single- and double-sided “running man” luminaires run 8–20 green emitters behind a diffuser on a small battery pack. Because the 2835 delivers usable flux at 60 mA, a sign can reach 3-hour autonomy with a smaller, cheaper cell — a decisive lever for OEMs bidding on large projects.

2. Low-level escape route and floor marker systems

Low-mounted wayfinding strips guide occupants underneath a smoke layer. Their long, narrow light guides reward a thin 0.8 mm package and a 120° Lambertian beam that couples evenly into the guide without hot spots.

3. Pharmacy crosses and “OPEN” window signs

The classic green pharmacy cross and window neon replacement run on the same wavelength. 515–525 nm sits right in the recognisable “medical green” range, and the 2.8 × 3.5 mm footprint lets module makers pack 3–6 chips per segment for an edge-lit acrylic face.

4. Industrial safety and machine-status signalling

Machine guard indicators, conveyor start warnings and clean-room status towers need a green that reads instantly through polycarbonate lenses. The wide −40 to +85 °C range covers unheated warehouses and outdoor cabinets alike.

5. Transport, lift and wayfinding panels

Bus and metro door indicators, lift panels and hospital wayfinding boards use dense arrays of small green pixels. Constant current driving keeps brightness matched across segments, so panels show no visible “stripes” after years of service.

Application Typical chip count Drive arrangement
Exit sign (single side)8–12 pcs3S3P, 12 V battery rail
Escape route strip20–60 pcs / mConstant current, 24 V
Pharmacy cross3–6 pcs per segment12 V with series resistor
Machine status tower6–15 pcs per lens24 V, PWM dimming

Four Notes for the Design File

  • Colour consistency: specify a single 515–525 nm bin plus one flux bin, otherwise adjacent segments of an exit sign can drift visibly greenish or bluish over time.
  • Thermal: even at 0.2 W, dense arrays in a sealed sign benefit from an aluminium-backed PCB; keep the pad temperature below 65 °C for full 50,000-hour life.
  • Compliance path: work with a luminaire partner targeting EN 1838 or UL 924, and validate luminance on the finished sign, not on the chip alone.
  • Backup testing: run the 3-hour autonomy test at the lowest specified battery voltage, where forward current and flux drop together.

Sourcing the 2835 Green SMD LED

Dongguan Lanjin Optoelectronics Co., Ltd. produces this 515–525 nm green chip alongside its 2835, 3030, 3528, 5050 and 5730 families, with 500 KK monthly capacity and 5–15 day delivery. Every reel of 4,000 pcs ships anti-static bagged and carton protected, uses San'an chips, is RoHS and Reach compliant, and carries a two-year warranty. The MOQ starts at 4,000 pcs, so sign makers can buy production quantities without committing to a full panel, while OEM/ODM customers can request matched resistor values for 5 V, 12 V and 24 V boards.

Building an exit sign programme?

Send your sign size, segment count and backup voltage to the Lanjin team for a matched 2835 sample reel, wavelength bin report and drive calculation.

میخانه زمان : 2026-11-18 09:40:54 >> لیست اخبار
اطلاعات تماس
Dongguan Lanjin Optoelectronics Co., Ltd.

تماس با شخص: Miss. Ava Huang

تلفن: +86 18819512052

فکس: 86-0769-89616935

ارسال درخواست خود را به طور مستقیم به ما (0 / 3000)